Material Name: 310S 310S Stainless Steel (2520) high temperature steel; 310S for Nickel (Ni), chromium (Cr) content is high, with good resistance to oxidation, corrosion, acid salt, high temperature performance, high-temperature electric furnaces in the manufacture of special steel tube and so on, austenitic stainless steel to increase the carbon content, due to its solid solution strengthening effect of the strength is improved, the chemical composition of austenitic stainless steel features are chromium, nickel-based add molybdenum, tungsten, niobium and titanium elements, because of its organization as a face-centered cubic structure, which at high temperatures with high strength and creep strength. [1] Features 
 310S stainless steel is austenitic chrome-nickel stainless steel has good oxidation resistance, corrosion resistance, because a higher percentage of chromium and nickel, so has much better creep strength at high temperature continuous operation, with good resistance to High temperature resistance. By Nickel (Ni), chromium (Cr) content is high, with good resistance to oxidation, corrosion, acid and alkali, high temperature resistance, high temperature electric furnace steel pipe dedicated to manufacturing and other occasions, austenitic stainless steel to increase the carbon content after , because of its solid solution strengthening effect of the strength is improved, the chemical composition of austenitic stainless steel features are chromium, nickel-based add molybdenum, tungsten, niobium and titanium and other elements, because of its organization as a face-centered cubic structure, which at high temperatures under the high strength and creep strength. 
 310S heat-resistant steel 
 Use 
 Petroleum, electronics, chemical, pharmaceutical, textile, food, machinery, construction, nuclear power, aerospace, military and other industries! 

 Physical properties 
 310S chemical composition 
 Grade Ni Cr Si Mn CSP 
 310S 19.00-22.00 24.00-26.00 ≤ 1.50 ≤ 2.00 ≤ 0.08 ≤ 0.030 ≤ 0.035 [2] 

 Mechanical Properties 
 Hardness (HB): ≤ 187 tensile strength (бb) (Mpa): ≥ 520 Yield strength (σs) (Mpa): ≥ 205 Elongation (δ)%: ≥ 40 reduction in area (ψ)%: ≥ 50